| fff |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
For Additional Information Contact: William Gibb, President (206) 250-7035 Terry Derian, Sales and Business Development (510) 305-9080 Scott Adan, Ph.D., P.E., S.E., SECB - Structural Consultant (415) 370-1601 |
| fff |
| fff |
| fff |
Bracket extensively tested at ATLSS lab, WYLE lab and UCSD; fulfills all current FEMA requirements. ANSI/AISC 358-05 Seismic Provisions |
Cost Savings
Features
 | SAVINGS of 20%+ realized in the initial connection costs even before | |
| erection |
| Both the new construction and retrofit versions are entirely field | |
| bolted to eliminate field welding |
| The KBB is fast and easy to calculate sizes and install |
| Days are reduced from the schedule for this easy fit bolted approach |
Features
| 100% LEED credits for Green Construction |
| Easy engineering calculation spreadsheet plus technical support | |
| available |
| No continuity plates - in new construction |
| Drill & Bolt in place retrofits - without welding |
| Short vertical slots in column for easy fit – in new construction |
| No License or engineering fees |
| The Engineer of Record does all engineering and remains in control | |
| of the project |
| Welcome to Steel Cast Connections Source for the Kaiser Bolted Bracket (KBB) and Kaiser Ordinary Moment Frame (KMF) |
| Products and Services |
| Kaiser Bolted Bracket (KBB) - All Bolted Installation |
| New Construction SMRF |
| Seismic Retrofits |
| Engineering Support |
| Kaiser Moment Frame - Our smaller bracket for Ordinary Moment | |
| Frames |
| Kaiser Base Plate |
| Custom design steel castings / HSS node connections | |
The Kaiser Bolted Bracket is a Special Moment Frame connection which is
shop fillet welded then installed entirely by bolting in the field. It saves hours
of installation time and money and is tested and proven to meet the highest
standards. The KBB connection is pre-approved in the ANSI/AISC
358-05-s1 Seismic Provisions Code.
Imagine retrofitting a building without welding! The KBB retrofit version is
bolted in both directions to provide the seismic retrofit without field welding.
It is simply drilled and bolted in place!
shop fillet welded then installed entirely by bolting in the field. It saves hours
of installation time and money and is tested and proven to meet the highest
standards. The KBB connection is pre-approved in the ANSI/AISC
358-05-s1 Seismic Provisions Code.
Imagine retrofitting a building without welding! The KBB retrofit version is
bolted in both directions to provide the seismic retrofit without field welding.
It is simply drilled and bolted in place!
| Benefits and Features |
| ff |
| Green Construction Traditional wrought steel materials used in construction consist of a combination of recycled and new steel made from iron oar and cannot be classified as a green material. Steel castings are made from recycled steel and are officially rated as 100% recycled material which qualifies them for full green building LEED credits. |
| ff |